Granite for Staircase in Kishangarh
Precision-calibrated gangsaw slabs engineered for staircase durability, stain resistance, and timeless luxury aesthetics.
Engineered Granite Solutions for Staircase
The stone staircase is the architectural centrepiece of any grand home — where craftsmanship, material quality, and visual impact converge.
At Granite Gallery, we supply large-format gangsaw slabs (up to 3200×1800mm), precision-cut tiles, and bespoke edge profiles processed at our Kishangarh facility to exact millimeter tolerances.
- High Load Strength
- Compressive strength of 200–230 MPa, ensuring zero cracking under heavy structural loads.
- Precision Calibration
- Uniform 18mm/20mm thickness calibration prevents uneven lippage and minimizes installation labor.
- Factory Gate Sourcing
- Inspect entire gangsaw bookmatched lots live at our MEGA Highway yard.
Architectural Applications
Engineered for high-traffic durability, stain resistance, and timeless luxury aesthetics.
Precision 18mm gangsaw slabs with mirror polish
Interior Living & Lobby Flooring
High heat & scratch resistant 20mm calibrated tops
Monolithic Kitchen Islands
Dry-clad exterior facades & bookmatched lobby walls
Architectural Wall Cladding
Water-resistant vanities & anti-skid textured paving
Master Bathroom Sanctuaries
Technical Specifications & Requirements for Staircase
Proper installation guarantees that your granite staircase performs flawlessly for decades without cracks, stains, or hollow tiles.
- Structural sub-frame
- Bed treads onto a sound concrete or steel-framed stair designed to carry the added dead load of solid stone
- Tread thickness
- Use a minimum 30mm for cantilevered or open treads and 20mm for fully supported treads, sized to the going
- Uniform rise & going
- Keep every riser height and tread depth consistent to building-regulation tolerance — uneven steps are a trip hazard and a defect
- Anti-slip nosing
- Detail an anti-slip nosing (grooves, inset strips or a bull-nose) on every tread front edge — essential on polished stone
Architectural Staircase Installation Guide
Engineered laying practices to prevent hollow spots, cracks, and moisture staining.
Sub-Floor Curing & Leveling
Ensure the concrete substrate is fully cured (minimum 28 days) and free of dust. Never lay heavy stone over uncured or uneven screeds.
Polymer-Modified Adhesive
For white marbles and light granites, use specialized white adhesive instead of grey cement to avoid dark hydration staining bleeding through the stone.
Expansion Joints & Grouting
Maintain 2mm expansion joints across large floor spans to absorb seasonal temperature expansion, preventing tiles from lifting or tenting.
Impregnating Nano-Sealer
Apply a solvent-based penetrating impregnator within 48 hours of grouting to seal microscopic pores against oil, turmeric, and acidic spills.
Kishangarh Stone Processing Yard on the MEGA Highway
Visit our stone gallery to inspect live slab blocks, compare finishes, and finalize custom edge profiling.
Approx. 15 km (20 minutes) via NH48 direct bypass to Ralawata.
Approx. 8 km via Station Road connecting to the Marble Market corridor.
Take NH48 South towards Ajmer. Take the Kishangarh bypass onto the MEGA Highway.
Frequently Asked Questions About Granite in Staircase
Expert guidance on thickness, adhesive selection, expansion joints, and long-term stone maintenance.
Have a Custom Question? Chat UsCantilevered floating staircases require a minimum stone thickness of 30mm, along with an internal structural steel anchor support, to handle high torsion and loads safely.
We can mill subtle anti-slip grooves near the front edge of each tread, apply sandblasted safety bands, or process the tread surface to a honed finish while keeping the riser polished.